Description
Request a Quote · Request a Sample · Technical Inquiry
Product Overview
SIDUN 113 is a one-component self-levelling sealant for compatible narrow metal joints in window and door profiles. Assess the assembly orientation and actual gap on a representative sample before production.
Key Product Features
- Self-levelling placement
- Intended for narrow metal profile seams
- Small squeeze-pouch format
Application Advantages
- Gravity helps the material settle into a contained seam
- A profile offcut makes it possible to check flow and leakage before assembly
Recommended Applications
- Contained seams in metal window profiles
- Narrow channels in compatible door threshold profiles
- Bench trials at level profile junctions
Substrates & Compatibility
Use the actual metal finish and channel geometry in the evaluation. Account for plated, painted or anodised surfaces, channel outlets and adjoining materials that might contact any overflow.
Application Guidance
- Prepare — clean the profile and position it so the selected section can hold the sealant.
- Apply — make a small trial fill and control outlets or drainage paths according to the assembly detail.
- Check — inspect bead coverage, leakage and cured adhesion on the trial piece.
Packaging
The 2023 catalogue lists a 150 mL pouch, 24 pouches per carton, with a one-year shelf life for that edition. Black, grey, white and transparent are listed. Keep the original pack cool and dry, away from sunlight, below 30 °C. Confirm the offered label, finish and carton configuration when enquiring.
Technical Data
Confirm allowable gap dimensions, placement orientation, cure and coating compatibility for the selected version.
SIDUN-113 · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB
Download the Product Information Sheet (PDF)
Request model-specific TDS or SDS · Technical Resources
Selection Considerations
Share the profile section, gap dimensions, installed angle and whether it can be placed level during fabrication. Where the joint has an open or vertical run, confirm retention or select a format that suits that geometry.
FAQ
Can I dispense 113 into a vertical seam?
Self-levelling material follows gravity. Share the orientation and containment detail, then trial the actual profile to see whether the material stays where needed.
How does SIDUN 113 differ from PU388?
113 is a self-levelling option for a contained profile seam. PU388 is evaluated as a local bead at a cut end or mating face. Compare the two based on where the seal needs to sit.
Related Knowledge and Products
- Specialty Products product selection
- Windows and doors
- Window and door joint selection
- SIDUN PU388 for selected aluminium profile joints
Ask about this model
Include your application, pack, estimated quantity and destination market so the proposed specification can be confirmed for your order.
Request a Quote · Request a Sample · Technical Inquiry
Review the application · Read the application or procurement guide
What to include with your enquiry

Technical Data & Documents
Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.
Compare Related Products
SIDUN 288 Self-Levelling Metal Profile Sealant
Compare another model for gravity-assisted placement in metal profiles.
View productSIDUN 300 PU Sheet-Metal Sealant
Review a PU sheet-metal sealant for a different seam geometry.
View product













