SIDUN 109 Mirror Bonding Sealant

Bonding compatible backed mirrors in interior fit-outs and shop fabrication.

SKU: SIDUN-109
Category:

Description

Request a Quote · Request a Sample · Technical Inquiry

Product Overview

SIDUN 109 is a one-component neutral silicone intended for compatible mirror backings and mounting surfaces. Test the mirror coating and the mounting finish using an offcut of the same mirror type. Confirm permanent fixing and support requirements with the mirror supplier.

Key Product Features

  • Purpose-selected for mirror backing
  • Cartridge-applied adhesive
  • Coated backing and support assessed as part of selection

Application Advantages

  • Evaluate the mirror backing and mounting substrate together
  • Use a representative offcut to check bond and appearance before installation

Recommended Applications

  • Trial bonding for compatible vanity mirror backs
  • Interior decorative mirror mounting on approved stable substrates
  • Bonding trials on matching mirror and wall offcuts

Substrates & Compatibility

Identify the backing coating, any safety film and the exact mounting finish. Use an offcut from the same mirror type for staining and adhesion checks on both the backing and the mounting surface.

Application Guidance

  1. Prepare — verify the backing, substrate and support plan with the mirror supplier, then test an offcut.
  2. Apply — follow the approved bead layout and keep the mirror positioned on the specified supports.
  3. Check — allow the documented cure before changing temporary supports and follow the mirror supplier's permanent fixing requirements.

Packaging

The 2023 product catalogue lists a cartridge and a one-year shelf life for that edition. The catalogue specification lists 300 mL and 24 per carton; the archived label and later catalogue identify a 310 mL version. Transparent is the catalogue finish. Confirm the offered label, pack and carton configuration when enquiring.

Technical Data

Confirm backing compatibility, cure conditions, support duration and the permanent fixing requirements for the particular mirror and wall.

SIDUN-109 · English · Version 1.0 · 21 November 2026 · PDF, 3.6 KB

Download the Product Information Sheet (PDF)

Request model-specific TDS or SDS · Technical Resources

Selection Considerations

Include mirror dimensions, backing type, wall finish and a sketch of the support detail. Large or heavy panels need an installation plan matched to the mirror and mounting structure.

FAQ

Will 109 work with a safety-backed mirror?

Identify the safety film or backing manufacturer and test an offcut against the mounting surface. Ask the mirror supplier to confirm the installation method.

When can I remove the temporary supports?

Use the specified cure and support conditions for the selected version, panel and wall. Follow the mirror supplier's instructions for any permanent retainers.

Related Products & Guides

Discuss Your Application

Request a Quote · Request a Sample · Technical Inquiry

Review the application · Read the application or procurement guide

What to include with your enquiry
SIDUN 109 sample enquiry reference: Glass and backing type, Mounting surface, Support and cure conditions

Technical Data & Documents

Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.

Compare Related Products

SIDUN 7132 Acid-Cure Silicone for Glass Assembly

Review glass-sealing requirements separately from bonding a mirror backing.

View product

SIDUN 108 Neutral Sanitary Silicone

For non-mirror sanitary joints, review a silicone sealant.

View product

Product Enquiries