Description
Request a Quote · Request a Sample · Technical Inquiry
Product Overview
SIDUN PU288 is a two-component polyurethane adhesive for compatible aluminium window and door corner assemblies. Match the dual cartridge, gun and mixer to the selected pack and verify the assembly process on a representative corner.
Key Product Features
- Two-component polyurethane
- Dual-cartridge and mixer workflow
- Intended for aluminium profile corner bonding
Application Advantages
- Feed both components through a matched dispensing system
- Use a bench corner trial to verify mixing, fit and fixture sequence
Recommended Applications
- Two-component bonding of aluminium window corner inserts
- Compatible door frame mitre assemblies
- Workshop fit-up and bonding trials on aluminium profile corners
Substrates & Compatibility
Evaluate both profile and insert contact surfaces, including any anodising, powder coat or exposed cut edge. Use the actual corner gap and fixture arrangement in the trial.
Application Guidance
- Prepare — dry-fit the corner and confirm both components, the gun and the mixing nozzle match the pack.
- Apply — mix and dispense according to the current instructions, then close and fixture the joint within the confirmed working time.
- Check — follow the qualified cure and release process and examine the sample corner before starting production.
Packaging
The archived PU-288 sheet identifies a dual cartridge of 2 × 300 mL. Later catalogue entries list 600 mL. Confirm the current component sizes, mixers and number of sets per carton.
Technical Data
Request the current mixing ratio and its basis, the working time and the cure and fixture-release conditions for the actual assembly.
SIDUN-PU288 · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB
Download the Product Information Sheet (PDF)
Request model-specific TDS or SDS · Technical Resources
Selection Considerations
Share the profile and corner insert drawings, surface finish, gun and mixer references and target assembly cycle. Compare PU88 if your production process uses single-cartridge dispensing.
FAQ
Can I use a standard single-cartridge gun?
Match the gun and mixing nozzle to the specified two-component pack. Provide your dispenser model so both the fit and the dispensing configuration can be verified.
Is PU288 the same as SIDUN 288 metal profile sealant?
Request SIDUN PU288 for the two-component corner-bonding process. The SIDUN 288 metal profile sealant has its own product and application record.
Related Products & Guides
Discuss Your Application
Request a Quote · Request a Sample · Technical Inquiry
Review the application · Read the application or procurement guide
What to include with your enquiry

Technical Data & Documents
Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.
Compare Related Products
SIDUN PU88 One-Component Aluminium Corner Adhesive
Compare a one-component approach for aluminium corner joints.
View productSIDUN 600 Two-Component Epoxy Assembly Adhesive
Review another two-component assembly chemistry where appropriate.
View product













