SIDUN 5.0 Marine Component Joint Sealant

Evaluation for above-water seams around compatible marine components and fit-out details.

SKU: SIDUN-5.0
Category:

Description

Request a Quote · Request a Sample · Technical Inquiry

Product Overview

SIDUN 5.0 is a sealant for selected compatible marine component joints above the waterline. Describe the panel and frame materials, coatings and exposure so the relevant product grade can be assessed.

Key Product Features

  • Above-water marine component seams
  • Cartridge placement along accessible joints
  • Trial on the actual component finish

Application Advantages

  • A fit-out sample lets the installer inspect bead continuity around corners.
  • Testing both coated surfaces helps reveal adhesion or appearance issues before assembly.

Recommended Applications

  • Above-water seams around marine fit-out panels
  • Perimeter seams on compatible non-structural marine components
  • Exposed component transitions in an above-water assembly

Substrates & Compatibility

Identify each component material and its coating or finish. Check the joint drawing, movement, spray or cleaning exposure and any nearby previously cured material on a representative sample.

Application Guidance

  1. Prepare a representative seam using the actual coating and approved surface preparation.
  2. Trial a continuous bead across the straight section and corners of the seam.
  3. Inspect after cure and review adhesion and finish under the specified above-water exposure.

Packaging

The 2023 catalogue lists a 300 mL cartridge and a 590 mL foil pack, in grey and white, with a one-year shelf life for that edition. Confirm the offered format, colour and carton configuration with the quotation.

Technical Data

Request the current 5.0 technical and safety documents. Immersion, structural use and marine approvals require separate evidence for the specified installation.

SIDUN-5.0 · English · Version 1.0 · 21 November 2026 · PDF, 3.6 KB

Download the Product Information Sheet (PDF)

Request model-specific TDS or SDS · Technical Resources

Selection Considerations

Evaluate 5.0 for above-water component seams and fit-out details. For a seal bead specifically around the footprint of deck hardware, compare the separate SIDUN 7.0 selection scope.

FAQ

What should I provide for a coastal fit-out seam?

Send both facing materials, coatings, joint dimensions and expected spray, cleaning and movement.

Can the same trial qualify a continuously immersed seam?

Continuous immersion needs a separate technical review supported by test evidence for the proposed joint and exposure.

Related Products & Guides

Discuss Your Application

Request a Quote · Request a Sample · Technical Inquiry

What to include with your enquiry
SIDUN 5.0 sample enquiry reference: Materials and coatings, Joint location above the waterline, Service requirements

Technical Data & Documents

Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.

Compare Related Products

SIDUN 7.0 Deck Fitting Perimeter Sealant

Compare deck fitting perimeter details with general component seams.

View product

SIDUN CS23 Multipurpose Polyurethane Joint Sealant

For construction joints, review the corresponding PU grade separately.

View product

Product Enquiries