Description
Request a Quote · Request a Sample · Technical Inquiry
Product Overview
SIDUN 7.0 is intended for evaluation as an above-water perimeter seal around compatible deck fittings and surface-mounted hardware. The sample should reproduce the deck finish, fitting base and fastening layout.
Key Product Features
- Perimeter sealing around deck fitting footprints
- Above-water application scope
- Trial using the actual hardware and fastening layout
Application Advantages
- A dry fit shows whether the proposed bead can run continuously around the base.
- A mock-up lets the installer check the seal alongside the specified fasteners.
Recommended Applications
- Above-water perimeter around a surface-mounted deck fitting
- Seam along a compatible deck hardware base
- Perimeter of a non-structural cover mounted above the waterline
Substrates & Compatibility
Review the deck finish and material on the underside of the fitting. Include fastener locations, coating condition, joint access and exposure to spray and cleaning agents.
Application Guidance
- Dry-fit the hardware, mark the perimeter and note fastening and drainage features.
- Trial the perimeter bead on a representative deck and fitting assembly following current instructions.
- After cure, inspect continuity around the base and verify the specified fastening remained correctly seated.
Packaging
A 300 mL SIDUN 7.0 cartridge is documented in the catalogue. Confirm the current cartridge, batch and case quantity with the quote.
Technical Data
Request current 7.0 documentation for above-water fitting perimeters. Verify requirements for immersion, structural load and any project approvals independently.
SIDUN-7.0 · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB
Download the Product Information Sheet (PDF)
Request model-specific TDS or SDS · Technical Resources
Selection Considerations
Choose 7.0 for a perimeter bead at a fitting footprint when the fastening design is specified separately. For general above-water fit-out seams, compare SIDUN 5.0.
FAQ
Does the perimeter seal replace fittings or fasteners?
Use the specified mechanical fastening. The 7.0 trial evaluates the seal around the hardware footprint.
What does a fitting sample need to include?
Provide the deck finish, underside of the fitting, joint profile and fastener layout, including drainage features and expected exposure.
Related Products & Guides
- Polyurethane Sealants
- Explore applicable industries
- Read the technical selection guide
- SIDUN 300 metal joint sealant
Discuss Your Application
What to include with your enquiry

Technical Data & Documents
Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.
Compare Related Products
SIDUN 5.0 Marine Component Joint Sealant
Compare the exact component seam and service conditions.
View productSIDUN CS23 Multipurpose Polyurethane Joint Sealant
For a general-purpose joint, compare the applicable PU sealant documentation.
View product













