Skip to content

SIDUN · Silicone Sealants

SIDUN 101 Neutral Silicone Weatherseal

Neutral silicone sealing for building, window and door applications.

Model 101Neutral-cure silicone300 mL cartridge

Technical Inquiry

Front and back views of SIDUN 101 neutral silicone sealant cartridges.

Product Identity

SIDUN 101 is a neutral-cure silicone sealant for professional building and glazing work. It brings a practical cartridge format to sealing tasks involving glass, aluminium, coated panels and other selected building materials. For importers and distributors, the model provides a clear starting point for a building-sealant range; for project buyers, selection starts with the actual substrate, joint design and exposure conditions.

Main Applications

  • Window and door perimeter sealing
  • Selected glass, aluminium and building-panel joints
  • General building sealing and finishing

Key Product Characteristics

  • Neutral-cure silicone formulation
  • Cartridge format for controlled gun application
  • A model-focused choice for professional building-sealant ranges

Packaging

Pack format300 mL cartridge
Carton configuration24 cartridges
Colour directionTranslucent, grey, white and black

Discuss the required pack format, colour and order configuration when requesting a quotation.

Technical Information

SIDUN model101
Chemical familyNeutral-cure silicone

Application Considerations

Assess adhesion, the joint design and the actual materials, including coatings. Structural glazing calls for a product and system specified for that purpose.

Review the joint as a complete detail: glass, frame or panel surfaces, any coating and the surrounding construction. Include the exposure and desired finish in the discussion so that sample evaluation can focus on the relevant conditions.

Documentation

Include the product model, intended application and destination market when requesting technical or safety documentation. Our team can review the relevant product information and evaluation requirements with you.

Identify the product model, pack requirements and destination market when requesting information. Where a project needs additional testing or certification, describe the standard, application and scope so that the relevant work can be discussed.

Evaluate 101 for a weatherseal detail

Start with two surfaces and one joint drawing. For a window perimeter, identify the actual frame finish, the adjoining construction material, the joint width and depth, and the movement expected in service. Painted aluminium, bare aluminium and a powder-coated profile should be treated as different test surfaces.

What to verify on a sample

Use pieces of the actual frame and adjacent material. Record the surface preparation, primer if specified, bead geometry and cure conditions. Once the sample has cured under the agreed conditions, check for lifting at each edge and for changes to the finish. A short adhesion check can screen out a poor match, but it does not establish the movement or service life of the installed joint.

Is 101 a choice for load-bearing glazing?

Use 101 as a candidate for a weatherseal or perimeter detail. Where the sealant transfers structural loads or the project specifies a glazing system, have the designer identify the required system and evidence. See the window and door selection guide for the distinction between a weatherseal and a glazing bond.

For a sample request, include the substrate pair, finish, exposure and whether the bead is new work or a repair. For a compact tube used in smaller finishing jobs, compare SIDUN 101A as a separate model.

Related Products

Front and back of SIDUN 108 neutral sanitary silicone cartridges labelled 310 mL.
SIDUN 108

108 Neutral Sanitary Silicone

Neutral-cure silicone

Application: Kitchen and bathroom fitting installation

Pack: 310 mL cartridge · 24 cartridges

Front and back of SIDUN 101A silicone sealant tubes labelled 120 mL.
SIDUN 101A

101A Silicone Sealant — 120 mL Tube

One-component, moisture-curing silicone

Application: Window and kitchen-surface sealing details

Pack: 120 mL tube · 25 tubes

Let’s Discuss Your Product Requirements

Share your application, destination market and purchasing needs. We can discuss product selection, sample evaluation, packaging and a focused B2B supply plan.