Skip to content

SIDUN · Knowledge Center

Cartridge, Sausage and Two-Component Packs

Choose the pack together with the product and application equipment. A cartridge, flexible sausage, compact tube and two-component pack each bring different dispensing or mixing requirements; pack shape alone does not identify chemistry or suitability.

Dispensing and Mixing

Rigid cartridges require the appropriate applicator and nozzle. Flexible packs need compatible enclosed equipment. Compact tubes serve a different application format. Two-component products introduce separate materials and must be handled according to the specified proportioning and mixing procedure.

What Belongs in a Packaging Brief

Include the model, net quantity and unit, format, colour, label language and outer-carton requirements. For a production process, add the application equipment and any constraints on dispensing, storage or handling.

Common Purchasing Mistakes

Weight and volume describe different quantities. Do not replace grams with millilitres without a valid product-specific basis. A different pack format should also not be assumed to carry the instructions or identity of a neighbouring model.

SIDUN Model Examples

101 uses a 300 mL cartridge direction with 24 cartridges per carton in the catalogue configuration. 101A is a separate 120 mL tube with 25 tubes per carton. 108 and 817 use cartridge formats. For 189, specify the PE bottle configuration and required net quantity in the enquiry.

Agree the Order Configuration

Ask about the packaging needed for the intended market and purchasing programme. Sausage or two-component requirements should be discussed against a specific product and process, with the relevant equipment and instructions identified before the arrangement is agreed.

Continue Your Product Discussion

Use a model and a clear application brief when requesting samples, technical information or a quotation.

Explore Related Products

Front and back of SIDUN 101A silicone sealant tubes labelled 120 mL.
SIDUN 101A

101A Silicone Sealant — 120 mL Tube

One-component, moisture-curing silicone

Application: Window and kitchen-surface sealing details

Pack: 120 mL tube · 25 tubes

Front and back of SIDUN 108 neutral sanitary silicone cartridges labelled 310 mL.
SIDUN 108

108 Neutral Sanitary Silicone

Neutral-cure silicone

Application: Kitchen and bathroom fitting installation

Pack: 310 mL cartridge · 24 cartridges

Front and back of SIDUN 817 polyurethane adhesive cartridges labelled 300 mL.
SIDUN 817

817 Polyurethane Bonding Adhesive

Polyurethane adhesive

Application: Selected decorative and building-panel installation

Pack: 300 mL cartridge · 24 cartridges

Check the pack and the dispenser as a pair

Rigid cartridge or tube
For a cartridge, confirm the gun dimensions, plunger fit and nozzle attachment. For a compact tube, agree the supplied closure and nozzle. A production trial should use the equipment the team will run.
Flexible sausage
Confirm the capacity of the closed-barrel gun, the piston setup and the compatible nozzle. Specify the desired pack length and nominal fill where these affect existing equipment. Confirm model availability for the requested format.
Two-component pack
Check both components, the stated proportioning basis, the cartridge or feed connection, and the specified mixer. Ask which parts are included with the order and what is required at changeover. Link each component to the applicable document and pack identification. Medmix reference on industrial cartridge configurations.
Bottle
Confirm the closure, dispensing opening and nominal quantity in the declared unit. Discuss stability in transit and handling at the work station for the proposed format.

Do two packs of equal capacity cover the same seal length?

For a uniform bead, divide the net volume by its cross-sectional area. Because 1 mL equals 1,000 mm³, a 300 mL fill has a theoretical yield of 6 m for a bead area of 50 mm². The example illustrates quantity estimation. Use the project’s specified geometry and allow for transitions, nozzle and pack residue, and start-up losses when deciding how much to order.

Confirm the order on a pack specification

  1. Product and fill. State the exact model, colour, nominal fill and unit. If comparing mass and volume, ask for valid density information for the relevant product.
  2. Equipment and accessories. Identify the dispenser and compatible nozzle, closure or mixer. Record any equipment restrictions for automated production.
  3. Label and carton. Provide destination, label language, required markings, lot coding and the desired carton quantity. Agree artwork and carton details before the order.
  4. Receiving and storage. Specify handling conditions, required date marking and remaining shelf life on delivery. Use the applicable SDS and shipping information to plan handling and transport.

See the distinct configurations for the 101 cartridge, 101A compact tube and 189 bottle formats. Send the target format, quantity, applicator and destination to request a quotation. Packaging and label enquiries.

Let’s Discuss Your Product Requirements

Share your application, destination market and purchasing needs. We can discuss product selection, sample evaluation, packaging and a focused B2B supply plan.