Description
Request a Quote · Request a Sample · Technical Inquiry
Product Overview
SIDUN 365 is intended for evaluating joints and perimeters in cold-storage panel assemblies. Test it on the actual panel facing under separately defined installation and operating conditions, including expected condensation and cleaning.
Key Product Features
- Cold-storage panel seam focus
- Cartridge placement along panel joints
- Verification on the actual panel facing
Application Advantages
- Panel offcuts make it possible to check adhesion and appearance before installation.
- Separating installation from operating conditions helps define the approval trial.
Recommended Applications
- Vertical seams between compatible cold-room panels
- Panel perimeter joints in a refrigerated enclosure
- Internal corner transitions between compatible panel facings
Substrates & Compatibility
Identify the facing material, coating and joint edge. Use representative offcuts and report moisture or condensation, expected movement, cleaning products and the intended temperature cycle.
Application Guidance
- Prepare panel offcuts and document surface condition at installation.
- Trial the joint on the actual facing with the planned joint profile and preparation.
- Protect the sample through cure and review it under agreed service and cleaning conditions.
Packaging
A 300 mL cartridge is shown in SIDUN 365 catalogue and label records. Confirm the current label, colour and case configuration when requesting supply.
Technical Data
Request the current 365 instructions for application and service conditions. Low-temperature limits, hygiene requirements and regulated uses require supporting evidence for the project.
SIDUN-365 · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB
Download the Product Information Sheet (PDF)
Request model-specific TDS or SDS · Technical Resources
Selection Considerations
Choose a trial based on panel facing and joint design as well as the expected temperature cycle. Provide the installation and operating environments separately when requesting a sample.
FAQ
Can I choose 365 by operating temperature alone?
Send the installation condition, panel facing, condensation exposure and operating cycle together. Review the planned joint on a representative sample.
What should I send for a cold-storage panel trial?
Provide the panel designation, coating, joint detail and cleaning products, with the planned installation and service conditions.
Related Products & Guides
Discuss Your Application
Request a Quote · Request a Sample · Technical Inquiry
Review the application · Read the application or procurement guide
What to include with your enquiry

Technical Data & Documents
Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.
Compare Related Products
SIDUN CS23 Multipurpose Polyurethane Joint Sealant
Compare a general-purpose PU where the joint detail differs.
View productSIDUN 300 PU Sheet-Metal Sealant
For a sheet-metal seam, review the surface finish and service profile separately.
View product













