SIDUN PU288 Two-Component Aluminium Corner Adhesive

Aluminium window and door frame corner assembly using compatible profiles and inserts.

Description

Request a Quote · Request a Sample · Technical Inquiry

Product Overview

SIDUN PU288 is a two-component polyurethane adhesive for compatible aluminium window and door corner assemblies. Match the dual cartridge, gun and mixer to the selected pack and verify the assembly process on a representative corner.

Key Product Features

  • Two-component polyurethane
  • Dual-cartridge and mixer workflow
  • Intended for aluminium profile corner bonding

Application Advantages

  • Feed both components through a matched dispensing system
  • Use a bench corner trial to verify mixing, fit and fixture sequence

Recommended Applications

  • Two-component bonding of aluminium window corner inserts
  • Compatible door frame mitre assemblies
  • Workshop fit-up and bonding trials on aluminium profile corners

Substrates & Compatibility

Evaluate both profile and insert contact surfaces, including any anodising, powder coat or exposed cut edge. Use the actual corner gap and fixture arrangement in the trial.

Application Guidance

  1. Prepare — dry-fit the corner and confirm both components, the gun and the mixing nozzle match the pack.
  2. Apply — mix and dispense according to the current instructions, then close and fixture the joint within the confirmed working time.
  3. Check — follow the qualified cure and release process and examine the sample corner before starting production.

Packaging

The archived PU-288 sheet identifies a dual cartridge of 2 × 300 mL. Later catalogue entries list 600 mL. Confirm the current component sizes, mixers and number of sets per carton.

Technical Data

Request the current mixing ratio and its basis, the working time and the cure and fixture-release conditions for the actual assembly.

SIDUN-PU288 · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB

Download the Product Information Sheet (PDF)

Request model-specific TDS or SDS · Technical Resources

Selection Considerations

Share the profile and corner insert drawings, surface finish, gun and mixer references and target assembly cycle. Compare PU88 if your production process uses single-cartridge dispensing.

FAQ

Can I use a standard single-cartridge gun?

Match the gun and mixing nozzle to the specified two-component pack. Provide your dispenser model so both the fit and the dispensing configuration can be verified.

Is PU288 the same as SIDUN 288 metal profile sealant?

Request SIDUN PU288 for the two-component corner-bonding process. The SIDUN 288 metal profile sealant has its own product and application record.

Related Products & Guides

Discuss Your Application

Request a Quote · Request a Sample · Technical Inquiry

Review the application · Read the application or procurement guide

What to include with your enquiry
SIDUN PU288 sample enquiry reference: Profile and insert materials, Cartridge and mixer fit, Assembly sequence

Technical Data & Documents

Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.

Compare Related Products

SIDUN PU88 One-Component Aluminium Corner Adhesive

Compare a one-component approach for aluminium corner joints.

View product

SIDUN 600 Two-Component Epoxy Assembly Adhesive

Review another two-component assembly chemistry where appropriate.

View product

Product Enquiries