Description
Request a Quote · Request a Sample · Technical Inquiry
Product Overview
SIDUN 288 is a self-levelling sealant for narrow seams in compatible metal profiles. Position a representative profile in the intended fabrication orientation and check whether the material stays in the channel and leaves the required finish.
Key Product Features
- Self-levelling format for profile seams
- Narrow metal channel evaluation
- Cartridge-format catalogue version
Application Advantages
- A profile offcut gives the fabricator a direct check of flow and seam finish.
- A trial at the intended bench angle reveals where runout could occur.
Recommended Applications
- Narrow seams in metal profile channels
- Level or appropriately oriented profile joints on a fabrication bench
- Recessed seams in compatible formed-profile assemblies
Substrates & Compatibility
Use the actual metal grade and finish, including anodising, paint or other coating. Check the seam width, channel depth, openings at the ends and the orientation throughout placement and cure.
Application Guidance
- Prepare a representative channel with the production surface finish and joint dimensions.
- Set the profile in its intended orientation, trial placement and check for runout.
- Hold the profile in position during cure and assess the finished seam on the sample.
Packaging
The 300 mL cartridge is the catalogue version described here. Confirm the current cartridge and dispenser with the quote. Request separate confirmation for any historical pail reference.
Technical Data
Ask for current material, preparation, flow and cure guidance for this cartridge. Specify the profile orientation and seam dimensions when requesting technical data.
SIDUN-288 · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB
Download the Product Information Sheet (PDF)
Request model-specific TDS or SDS · Technical Resources
Selection Considerations
Choose 288 for a narrow seam that can retain self-levelling material. For a fabricated aluminium frame corner that requires adhesive between the profile and insert, evaluate the separate PU288 product.
FAQ
How does 288 differ from PU288?
288 is evaluated for metal profile sealing. PU288 is a two-component adhesive for aluminium corner assembly.
Can I use 288 in an upright profile?
Share the orientation and joint geometry. The self-levelling format needs a channel and position that retain the material during placement.
Related Products & Guides
Discuss Your Application
What to include with your enquiry

Technical Data & Documents
Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.
Compare Related Products
SIDUN 113 Self-Levelling Metal Joint Sealant
Compare levelling requirements and surfaces for a metal joint.
View productSIDUN 300 PU Sheet-Metal Sealant
Compare a PU grade intended for sheet-metal seams.
View product













