SIDUN 600 Two-Component Epoxy Assembly Adhesive

Bench evaluation of compatible component assemblies, fitting and bonding tasks.

SKU: SIDUN-600-EPOXY
Category: , ,

Description

Request a Quote · Request a Sample · Technical Inquiry

Product Overview

SIDUN 600 Epoxy is a two-component assembly adhesive for evaluating bonds between compatible parts. A representative build lets the fabricator assess the mating surfaces, bond area, alignment and fixture before setting an approval test.

Key Product Features

  • Two-component epoxy system
  • Bench evaluation of assembled parts
  • 600 mL catalogue assembly format

Application Advantages

  • A trial build reveals how the adhesive fits the proposed assembly sequence.
  • Testing production part geometry lets the buyer review the intended bond area and fixture.

Recommended Applications

  • Bench bonding of selected compatible component pairs
  • Trial assemblies with overlapping mating faces
  • Fitted component bonds on representative fabrication samples

Substrates & Compatibility

Identify each part material, grade and finish. Use the actual mating geometry and intended bond gap, and confirm surface treatment on the production finish or agreed representative coupons.

Application Guidance

  1. Dry-fit and mark the bond area, alignment and fixture locations.
  2. Mix and dispense the matching A and B components using current instructions, then fixture the trial assembly.
  3. Follow the documented cure conditions and test the assembly against the agreed acceptance criteria.

Packaging

The catalogue shows a 600 mL dual-component assembly adhesive. Confirm the current A and B configuration, dispensing equipment and case quantity when quoting.

Technical Data

Request the current mixing, working and cure instructions. Load-bearing, lifting and immersion uses require project-specific validation of the complete bonded assembly.

SIDUN-600-EPOXY · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB

Download the Product Information Sheet (PDF)

Request model-specific TDS or SDS · Technical Resources

Selection Considerations

Use the full 600 Epoxy designation for parts-bonding enquiries. Send part drawings, material grades, service exposure and planned validation so a representative assembly can be agreed.

FAQ

What should a sample bond represent?

Use the actual part grades, contact area and joint geometry, then agree the fixture and acceptance checks with the project team.

Which 600 should I ask for when bonding parts?

Ask for SIDUN 600 Epoxy assembly adhesive and include the part materials. SIDUN 600 Tile is for filling tile joints.

Related Products & Guides

Discuss Your Application

Request a Quote · Request a Sample · Technical Inquiry

Review the application · Read the application or procurement guide

What to include with your enquiry
SIDUN 600-EPOXY sample enquiry reference: Component material and coating, Fit and bond area, Load and cure conditions

Technical Data & Documents

Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.

Compare Related Products

SIDUN PU288 Two-Component Aluminium Corner Adhesive

For aluminium profile corners, compare the dedicated two-component PU option.

View product

SIDUN 189 One-Component PU Wood Adhesive

For a wood adhesive trial, review the one-component PU workflow.

View product

Product Enquiries