Description
Request a Quote · Request a Sample · Technical Inquiry
Product Overview
SIDUN PU88 is a one-component moisture-curing polyurethane adhesive for compatible aluminium profile corners. Evaluate the contact area and coating on reference parts from the intended window or door assembly.
Key Product Features
- One-component polyurethane
- Designed for aluminium frame corner assembly
- Single cartridge format
Application Advantages
- Dispense from one cartridge with no separate mixing stage
- Trial the corner insert, profile and fixture as one assembly
Recommended Applications
- Aluminium window sash corner assembly
- Compatible door frame mitre and insert bonding
- Workshop qualification of a finished aluminium corner detail
Substrates & Compatibility
Check the profile finish, exposed cut surface and corner insert material. Anodised and powder-coated surfaces may need separate preparation and adhesion trials to match the production finish.
Application Guidance
- Prepare — dry-fit the mitre and insert, verify contact surfaces and clean according to the approved method.
- Apply — dispense to the approved contact area and close and fixture the corner within the confirmed assembly time.
- Check — inspect alignment and bond after cure, then release the fixture according to the qualified process.
Packaging
The 2023 catalogue lists a transparent 310 mL cartridge, 24 per carton, with a one-year shelf life for that edition. Ask SIDUN to confirm the offered cartridge, finish and carton configuration.
Technical Data
Confirm assembly time, fixture release and cure conditions for the actual profile and selected version. Qualify the finished frame detail through representative testing.
SIDUN-PU88 · English · Version 1.0 · 21 November 2026 · PDF, 3.7 KB
Download the Product Information Sheet (PDF)
Request model-specific TDS or SDS · Technical Resources
Selection Considerations
Send the profile and insert drawings, surface finish, fixed assembly sequence and target fixture cycle. Compare the one-component PU88 process with PU288 if your line calls for two-component dispensing.
FAQ
Can I use PU88 on powder-coated aluminium?
Trial the actual coating and corner insert. Confirm which surfaces contact the adhesive and whether the approved preparation changes between coated and cut faces.
Does PU88 also seal the cut face?
Identify the bonding area and the sealing path in the drawing. Evaluate PU88 for the insert bond and choose a separate profile seam detail where needed.
Related Products & Guides
Discuss Your Application
Request a Quote · Request a Sample · Technical Inquiry
Review the application · Read the application or procurement guide
What to include with your enquiry

Technical Data & Documents
Use the selected model and packaging version when requesting a technical data sheet, safety data sheet or report. Include the substrate, service conditions and destination market so the relevant revision can be identified.
Compare Related Products
SIDUN PU288 Two-Component Aluminium Corner Adhesive
Compare a two-component workflow for profile corners.
View productSIDUN PU388 Aluminium Profile Joint Sealant
Review a model for sealing profile joints as a separate operation.
View product













